I noticed there are two options for USB driver in the python-ant code. If I change USB2Driver to USB1Driver in line 42, I get a different response where after the "starting node" message is output the program hangs and I have to Ctrl+C to exit. I've checked and my USB ANT stick is connected to /dev/ttyUSB0 and the output from, dmesg | tail, looks good in that the stick shows up as Dynastream Innovations. Raise NodeError('Could not stop ANT node (not started).')Īnt.: Could not stop ANT node (not started). I've tried your hrmdemo after going through the setup you describe in the document but it's not working for me.įile " garmin_ant_demo.py", line 39, in _exit_įile " garmin_ant_demo.py", line 33, in stopįile "/usr/local/lib/python2.7/dist-packages/ant-develop-py2.7.egg/ant/core/ node.py", line 167, in stop With the following content (all one one line): SUBSYSTEM="usb", ATTRS".format(e))Ĭfg = dev.get_active_configuration() Archived Comments First unplug the Movestick then create the following file: ~ $ sudo vi /etc/udev/rules.d/les
DRIVER ANT USB STICK 2 SERIAL
To get the usb serial kernel driver to create a node for our Movestick mini we need to create an udev rule. The four digits after ID are the vendor id, the four digits after that the product id: ~ $ lsusbīus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.īus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubīus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.īus 001 Device 004: ID 0fcf:1008 Dynastream Innovations, Inc. The Movestick mini appears as Dynastream Innovations, Inc. Allows you to connect your laptop or desktop to ANT+ trainers and accessories. You can also get those ids by running lsusb. Product Features Connect your PC to your favorite indoor cycling app. For the Movestick mini they should always be: You should see entries for the Suunto Movestick mini and the corresponding vendor id and product id. usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.3: New USB device found, idVendor=0fcf, idProduct=1008 usb 1-1.3: new full-speed USB device number 4 using dwc_otg Check that the stick is recognized by running ~ $ dmesg | tail Log in to the Raspberry Pi, then insert the Movestick mini. The Garmin Premium Soft Strap Heart Rate Monitor, which serves as the Ant+ sender. The Suunto Pods Movestick Mini, SS016591000, which serves as the Ant+ receiver. I’m using Raspbian as the operating system.
What you’ll need ImageĪ Raspberry Pi with power supply and SD card. Instead I focus on getting the stick to run on Raspberry Pi.
DRIVER ANT USB STICK 2 CODE
His code works great and this blog does nothing to improve the code. This blog post is inspired by the excellent blog post “Monitoring your developer health with an ANT+ sensor” by Tom Wardill.
0 kommentar(er)
